2
GUIDA UTENTE - USER GUIDE - FÜHRER BENUTZER - GUIDE USAGER - GUÍA USUARIO
INSTRUCTIONS AND WARNINGS FOR AUTOMATIC SYSTEM USERS
CONGRATULATIONS on choosing a Tau product for your automation system!
Tau S.r.l. produces components for automatic gates, doors, barriers and shutters. These include gear motors, control units, radio control
Tau products are exclusively made with top quality materials and processes and, as a company, we constantly research and develop innovative
Tau, however, does not produce your automated system as this is the outcome of a process of analysis, evaluation, choice of materials and
tailor-made to your requirements, featuring long-term safety and reliability, and, above all, professionally installed and compliant with current
regulations.
years.
DESCRIPTION
The MASTER automated system for sliding gates is an electro-mechanical non-reversing operator that transmits motion to the leaf via a worm
screw system.
customised key makes it possible to manually move the leaf in the event of a malfunction or of a power failure.
situations being generated, usually due to irresponsible and/or incorrect use. For this reason we would like to give you some suggestions on
how to avoid these risks:
-
hand it over to the new owner.
- irresponsible and/or incorrect use may cause it to become dangerous.
- IT IS NOT A TOY!
- Faults: If you notice any abnormal behaviour, disconnect the system from the power supply immediately and perform the manual release
- Maintenance:
(IF THE DOCUMENTS ARE NOT PRODUCED, THE WARRANTY WILL EXPIRE).
- Disposal:
of according to local regulations.
N.B.:
reason for the fault, simply replace the battery with another one of the same type.
products on the market, best operation and maximum automation compatibility.
requirements.
> ENGLISH
User
Guide
MANUAL OPERATION
If the gate has to be operated manually due to a power cut or malfunction
of the automated system, use the release device as follows:
RESTORING NORMAL OPERATION
To prevent an involuntary pulse from activating the gate during the
manoeuvre, cut power to the system before relocking the operator.
cover of the lock.
1 2
To Next Page
Loading...
Need help?
General
