Taurus CROSSBACK ALL OVER - Battery Removal; Removing Batteries from the Device

- Disconnect the dust tank pressing the button
(B),removethecycloneandthelter(Fig.8)
- Removethelterfromitshousing(Fig.9).
- Toreassemblethelter,proceedwiththe
above instructions, in reverse order.
- IMPORTANT:Thelterscanbecleanedwith
cold water, but they must be left to dry for a
minimum of 24 hours before reusing them.
CLEANING THE ROTARY BRUSH:
- At the bottom of the brush you have to press
thebuttontounpinthebrush(Fig.10)
- Clean the brush with the help of scissors
- To reassemble, follow the above instructions
but in reverse.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnec-
ted from the supply mains when removing the
batteries.
TO REMOVE THE BATTERIES, ONCE THE
LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
- Pressthebutton(J)andremovethebattery
fromitshousing(Fig.11).