Taurus I3021T - Noise and Performance Issues

The glass is becoming
scratched.
Use of an unsuitable and/or
abrasive scouring pad.
Cookware with a rough base.
Use cookware with a
smooth, flat base. Check the
cleaning and maintenance
section.
Certain cookware makes
popping and cracking
sounds
This may be due to the way the
cookware is made (layers of
different metals vibrating
differently).
This is normal and not
considered a problem.
The induction hob hums
slightly when used at
high temperature.
This is due to the technology used
for induction cooking.
This is normal, the noise
should decrease or
disappear completely when
the temperature lowered.
Fan noise coming from
the induction hob.
The induction hob’s built-in cooling
fan has switched on to prevent the
electronics from overheating.
This is normal and requires
no action. You can continue
cooking while the fan is
running. There is no need to
switch the appliance off.
Motor fan is making a
strange noise
The fan is damaged
Replace the motor fan.
The cookware does not
get hot and does not
appear on the display.
The cookware is not suitable for
induction cooking or either too
small for the hob or not centred.
Use induction cookware,
centre it on the cooking area
and make sure that the base
is suitable.
The induction hob or a
cooking area has
switched off
automatically. A sound
is emitted and an error
code is displayed
(usually alternating with
one or two digits on the
timer display).
Technical fault.
Make a note of the error and
switch off the power to the
induction hob. Contact a
qualified technician.
Some buttons do not
work or the LED display
is not normal.
The display board is damaged.
Replace the display board.
The cooking mode
indicator lights up but
heating does not start.
Hob is too hot.
Ambient temperature may
be too high. The air inlet or
outlet could be blocked.
The cooking mode
indicator lights up but
heating does not start.
Heating stops suddenly
during use and the
display screen flashes
“u”.
There is something wrong with the
fan.
Make sure the fan works
properly; if not, replace the
fan.
The power board is damaged.
Replace the power supply
board.
Wrong type of cookware.
Use the correct cookware
(consult the instruction
manual).
Heating stops suddenly
during use and the
Cookware diameter is too small.
Use the correct cookware
(consult the instruction
manual).
The hob has overheated
Downloaded by: pd-oliana on 30-01-2023 16:33 CET