What to do if the Taurus Hob induction hob will not switch on?
If your Taurus Hob induction hob won't switch on, first ensure it's properly connected to a power supply and switched on. Check for any power outages in your home. Also, inspect the connection of the accessory power board and display board. If problems persist, the accessory power board may be damaged and need replacement.
What to do if touch controls are difficult to operate on Taurus Hob?
If the touch controls on your Taurus Hob are difficult to operate, ensure the control area is dry. Also, use the flat of your finger when touching the controls, not just the tip.
What to do if the cookware does not get hot on Taurus Hob?
If your cookware isn't heating up on the Taurus Hob and doesn't appear on the display, it might not be suitable for induction cooking. Ensure you're using induction cookware, that it's centered on the cooking area, and that the base is suitable for induction hobs.
What does code C2 mean on Taurus Hob?
Code C2 on your Taurus Hob indicates that the IGBT temperature is too high. Wait until the IGBT temperature returns to normal. Use the “ON/OFF” control to restart the appliance. Check that the fan is working correctly. Otherwise replace the fan.
What does code E1 mean on Taurus Hob?
Code E1 on your Taurus Hob indicates a temperature sensor error, specifically an open circuit. You should check the connection or replace the hob’s temperature sensor.
Why did my Taurus Hob switch off automatically and display an error code?
If your Taurus Hob switches off automatically, emits a sound, and displays an error code, this indicates a technical fault. Make a note of the error and switch off the power to the induction hob.
What does code C1 mean on Taurus Hob?
Code C1 on your Taurus Hob means the sensor temperature is too high. Wait for the hob temperature to return to normal. Touch the “ON/OFF” button to restart the unit.
What does code EL mean on Taurus Hob?
Code EL on your Taurus Hob indicates that the supply voltage is lower than the rated voltage. Check to see whether the power supply is normal. Switch on after the power supply returns to normal.
What does code EU mean on Taurus Hob?
Code EU on your Taurus Hob indicates a communication error. Reattach the connection between the power supply panel and the display.
Why does heating stop suddenly and the display screen flashes “u” on my Taurus Hob?
If heating stops suddenly during use and the display screen flashes “u” on your Taurus Hob, the pot has overheated. Wait for the temperature to return to normal.
General| Type | Induction Hob |
|---|---|
| Number of Burners/Cooking Zones | 2 |
| Control Type | Touch Control |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Material | Glass Ceramic |
| Dimensions (WxDxH) | 590 x 520 x 60 mm |
| Safety Features | Child Lock |
Provides installation dimensions for 13021T, 1603T, and 1603F models.
Outlines steps for cutting worktop, sealing, ventilation, and fixing the hob.
Details mains connection requirements, wiring, and voltage checks.
Verifies cable accessibility, ventilation, isolation switch, and bracket installation.
Explains how to place cookware, turn on, select areas, and set power.
Specifies suitable cookware types, base properties, and detection methods.
Details how to activate the boost function for maximum power on cooking areas.
Details the auto-off function and emphasizes not leaving the hob unattended.
Addresses problems with hob power, controls, heating, and error displays.
Lists and explains error codes specific to the 13021T, 1603T, and 1603F models.
To Next Page
