13
Step 3
⚠ CAUTION
Remove the dumbbells from the tray before assembling.
1. If you have purchased the Easy Bar, now attach the hook according to the instructions in the
next chapter.
2. Attach the trays to the tray plates (2) with four screws (7) each. Tighten with a screwdriver.
Step 4
Place the dumbbells onto the stand.
Easy Bar
NOTICE
If the rack and tray have already been fully installed, you must rst remove the right tray by
removing the four screws (7).
Attach the hook to the tray plate (2) with the enclosed hook screws (3).
To Next Page
Loading...
