19
Internal Weight Plate Adjustment not Running Smooth
If the adjustment of the inner weight plates is not smooth,
set the adjustment lever to 0lb (no weight selected). Lift the
dumbbell and set it down 3-5 times quickly.
5.3 Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the speci ed intervals:
Part Weekly Monthly Quarterly Half-yearly Yearly
Screw connections I
Lubricating the
adjustment pin
I
Legend: C = clean; I = inspect
6 DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via a recycling centre. Further information can be obtained from your
local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse and recycling of materials or
other forms of recovery of old equipment, you make an important contribution to
the protection of the environment.
To Next Page
Loading...
