OTHER USEFULL INFORMATION
Cleaning and maintenance
Before cleaning and maintenance, always switch off the machine and remove the mains
plug from the mains.
Regularly clean the housing with a soft cloth.•
Keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to •
remove dust and dirt from the ventilation slots.
Regularly clean the cutting discs to avoid inaccuracies during use.•
Warranty
Consult the enclosed warranty terms.
Environment
The product, the accessories, and the packaging must be sorted for environmentally
friendly recycling.
Only for EC countries
Do not dispose of power tools into domestic waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national
right, power tools that are no longer usable must be collected separately and disposed of in an
environmentally friendly way.
The product and the user manual are subject to change. Specifications can be changed
without further notice.
To Next Page
Loading...