To Next PageTo Next PageWhy is steam leaking from the side of the lid of my Tayama Electric Pressure Cooker?
Steam may leak from the side of the lid for several reasons. It could be due to a missing or damaged sealing ring, food debris attached to the sealing ring, or the lid not being closed properly. Try installing or replacing the sealing ring, cleaning the sealing ring, or reopening and closing the lid securely.
What to do if the lid of my Tayama B8 is difficult to open?
If the lid is difficult to open, there may be pressure inside the cooker or the float valve is stuck. Use the steam release handle to reduce the internal pressure and wait until it's fully released before opening the lid. If the float valve is stuck, gently press it down with a pen or chopstick.
How to fix rice that is half cooked in my Tayama Electric Pressure Cooker?
If your rice is half cooked, too hard, or too soft, the water ratio may be incorrect. Adjust the dry rice and water ratio according to the recipe. If you opened the cover too early, after the cooking cycle completes, leave the cover on for 5 more minutes before opening.
Why is the display blank on my Tayama B8 Electric Pressure Cooker after plugging it in?
A blank display could indicate a bad power connection, no power, or a blown fuse. Inspect the power cord to ensure a good connection and check that the power outlet is active.
Why is steam leaking from the float valve of my Tayama Electric Pressure Cooker for more than 2 minutes?
Steam leaking from the float valve for an extended time suggests food debris on the float valve silicone seal or a worn-out silicone ring. Clean or replace the float valve silicone seal to resolve this issue.
Why is it difficult to close the lid of my Tayama B8 Electric Pressure Cooker?
If you're having trouble closing the lid, it might be due to the airproof rubber sealing ring not being installed properly or the float valve being in the popped-up position. Ensure the sealing ring is correctly positioned, and press the float valve lightly downwards.
What to do if the float valve won't rise on my Tayama B8?
If the float valve won't rise, there might not be enough food or water in the inner pot, or the float valve could be obstructed. Add water according to the recipe and ensure the lid is completely closed, not obstructing the float valve.
What does error code E3 mean on my Tayama B8?
Error code E3 indicates that the temperature is too high. Check the inner pot for sufficient water or whether there is an obstruction between the inner pot and the heating element.
Details default settings and adjustments for various cooking programs like Fish, Cake, and Meat.
General| Power | 1000W |
|---|---|
| Material | Stainless Steel |
| Control Type | Digital |
| Safety Features | Overheat protection, safety lock |
| Functions | Pressure cooking, steaming, slow cooking, rice cooking |
