Step 1: Attach B & C Bows (Three Bow Tops only) to A Bow Assembly
Locate Left Side A Bow and place to workplace with Jawslides facing
upward. Remove screws from jawslide temporarily while you place the
eye-end of one C Bow into jawslide closest to the large bend in the A Bow –
replace screw and tighten. Repeat this process for a B Bow into the lower
jawslide on the A Bow. Note: For Two Bow style tops, you would only need to
attach the B-Bows in this manner.
Repeat this step for the Right Side A – B – C Bow assembly – set aside.
STEP 2: Assemble Centers to A, B and C Bows (3 Bow Tops only)
Slide end portion of a Center bow into the Left side A Bow assembly.
Two holes on bows should align with holes on center. Secure using two
#8 x 5/8” screws.
Continue the assembly process by securing two more Center Bows to the
left side C Bow (shortest – for Three Bow tops only) and B Bow with the #8
screws. The left side of the frame is now completed.
2
To Next Page
Loading...
