Mechanical Dial Bathroom Scale
INSTRUCTIONS FOR USE & WARRANTY INFORMATION
CUSTOMER SERVICE INFORMATION
PLEASE READ!
TAYLOR
division of Lifetime Brands, Inc.
2220 Entrada Del Sol, Suite A | Las Cruces, New Mexico 88001 USA
1-866-843-3905 |
www.taylorusa.com
Email: taylorusa@lifetimebrands.com
We value your thoughts on our product and services. Please post an on-line
review to help us continue to meet your needs and expectations.
Please contact us before returning to retailer.
For questions regarding this product, please contact us at:
MODEL # 2000/2020
OPERATING INSTRUCTIONS
• Place your scale on a hard, flat surface, do not use on uneven tile, flooring or carpeting.
Try to keep your scale in the same location or position as much as possible.
• Before using scale, allow it to reach room temperature; then put scale through several
weighing cycles consisting of:
• Step on scale and allow dial or pointer to come to rest.
• Step off scale and allow dial or pointer to come to rest.
• If scale is relocated, readjustment to zero may be required. Repeat above procedure.
When weighing, place feet on platform so weight is evenly distributed.
• After weighing cycles are completed, adjust dial or pointer to zero, if necessary
(adjustment knob is located under edge of platform or, on some models, under edge of
dial), and repeat weighing cycles until zero is stabilized.
CARE & MAINTENANCE
An occasional wiping with a soft cloth and mild soap will keep your scale attractive. Do not use
abrasive cleaners. Your scale does not require oiling or lubrication of any kind.
To Next Page
Need help?
General
