To Next PageTo Next Page
Need help?Do you have a question about the Taylor 5736F and is the answer not in the manual?
Terms and conditions of the scale's limited warranty.
Contact information for product support and inquiries.
Essential safety guidelines, warning symbols, and usage precautions.
Warnings against misuse and potential hazards.
Critical usage guidelines and user responsibilities.
Detailed steps for body composition measurement with user memory.
Terms and conditions of the scale's limited warranty.
Contact information for product support and inquiries.
Essential safety guidelines, warning symbols, and usage precautions.
Warnings against misuse and potential hazards.
Critical usage guidelines and user responsibilities.
Detailed steps for body composition measurement with user memory.
The Taylor Body Composition Scale, model #5736F, is an instruction manual and warranty information guide for a body composition scale designed to estimate body fat, total body water, and muscle mass percentage. This device utilizes Bioelectrical Impedance Analysis (BIA) technology, which involves sending a harmless electrical signal through the body to measure impedance and subsequently estimate body composition percentages. The scale is manufactured in an ISO 9001, ISO 14001, OHSAS 18001, and ISO 13485 certified facility, ensuring quality, environmental, health, safety, and medical device standards.
The primary function of this scale is to measure body weight and estimate body fat, total body water, and muscle mass percentages. It is suitable for healthy children aged 10-17 and healthy adults aged 10-85 with active, moderately active, or inactive lifestyles for body composition assessment in a home environment. The scale includes an "Athlete Mode" for individuals aged 15-85 whose body build differs from non-athletes, acknowledging physiological variations in bone density and hydration levels that can affect BIA readings.
The scale features four personal memory settings (P0-P3), allowing users to store and recall their height, age, and gender data. This eliminates the need to re-enter personal information for each use, unless there is a change. The device operates with a simple four-button interface: "ON," "SET," and two arrow keys (▲ and ▼). The "ON" key powers on the scale and initiates the body fat and body water estimation mode. The "SET" key confirms selections, while the arrow keys adjust values for height and age, toggle between male and female genders, and switch between Normal and Athlete modes. These keys also facilitate fast recall of memory locations.
For a weighing-only operation, users simply step onto the scale and stand still. The scale displays the weight and then automatically turns off. For body fat and total body water estimation, users first select a memory location, confirm Normal or Athlete mode, set their gender, and input their age and height. After these settings are confirmed, the scale prompts the user to step on it with bare feet. The device then sequentially displays weight, body fat percentage, total body water percentage, and muscle mass percentage three times before automatically turning off.
To ensure accurate readings, the scale should always be used on a flat and hard floor surface, not on carpets. Users are advised to position their bare feet for maximum contact with the metal electrodes on the platform. Slightly moist feet can enhance electrical contact and provide better results. The scale needs to be started up after each battery insertion/replacement or whenever it has been moved or bumped, by pressing lightly on the platform until "8888" appears and then turns off.
The scale's unit of measure can be switched between kilograms/centimeters and pounds/inches using a slide switch located on the bottom of the unit. This allows users to customize the display to their preferred measurement system.
It is important to note that body fat percentage estimates can vary with the body's water content and can be influenced by factors such as dehydration, over-hydration, alcohol consumption, menstruation, illness, or intense exercise. For consistency and accuracy, it is recommended to use the scale at approximately the same time each day, ideally before breakfast. Establishing a personal baseline and tracking changes over time is more beneficial than comparing values to general "normal" ranges. The estimates provided are not substitutes for physician assessments, and users should consult their physician for ideal body fat and total body water percentages.
The scale operates on one CR2032 lithium battery. When "Lo" is displayed on the screen, it indicates that the battery is running low and needs replacement. To replace the battery, users must remove any screws and open the battery cover on the back of the scale. Care should be taken not to overtighten the screws or turn them in the wrong direction, as this can strip the threads. The plastic strip should be removed for first use. If the unit will not be used for an extended period, it is advisable to remove the battery to prevent leakage.
For cleaning, the scale should be wiped with a dampened cloth. Solvents or immersion in water should be avoided. The scale contains no user-serviceable parts other than the battery, and disassembly is not recommended as it may cause damage. To prolong the life and accuracy of the device, excessive impact or vibration should be avoided, and nothing should be stored on the scale. It should also be stored away from cleaning chemicals, as their vapors can affect the electronic components. Batteries should be disposed of according to local regulations and never in fire, as they may explode or leak. Batteries can pose a choking hazard, so children should not handle them.
General| Type | Digital Kitchen Scale |
|---|---|
| Capacity | 11 lb / 5 kg |
| Increments | 0.1 oz / 1 g |
| Power | Battery |
| Material | Glass |
| Display | LCD |
| Units of Measurement | Pounds |
| Units | Grams |
