Taylor 35 - User Manual

TAYLOR 35 USER MANUAL AND IMPORTANT INFO
Congratulations, and thank you for purchasing your new TAYLOR engine.
This is a high performance, two stroke engine which produces mulitple times the power of a standard
largescale, RC car/buggy engine. Please be prepared for the insane increase from your RC!!
Drive with care while you are getting used to this.
We strongly recommend fitting a remote kill switch to your engine, as should be the practice with all
largescale cars. All Normal 1/5 scale kill switches work properly with this engine, it is also supplied with a
standard kill button.
Important Safety Note:
Because of the performance potential of this engine in a vehicle, such as the HPI Baja, it is
necessary to operate the vehicle in a suitable, controlled environment. It should not be operated
in a public space where people are engaged in other activities, such as a public park. Do not operate
in an area where there are children playing, near pets or other animals. Do not operate on a public.
highway.
Loss of control of such a vehicle could result in serious injury to another person, family pet or other
animal.
Be aware that the engine silencing is minimal so do not run the engine in an area where this could
cause a nuisance. You and those around you should always use ear protection during operation.
Please note: All of the manufacturers safety instructions for the operation of the vehicle in which the
engine is fitted, must be followed.
Fuel Safety Guidelines
Fuel is highly flammable. Never operate the vehicle
near open flames. Do not smoke while handling fuel.
Always operate the vehicle in a well ventilated area.
Model car engines produce carbon monoxide fumes.
Hot Engine surfaces
DO NOT at any time when running or within 30minutes
of running touch any metal surfaces on the engine.
Only the pull start handle, carb and stop buttons can be
considered safe to touch when hot.

Summary

Welcome and Safety Information

Important Safety Note

Key safety precautions for operating the high-performance TAYLOR 35 engine.

Fuel Safety Guidelines

Guidelines for safe handling and use of fuel with the engine.

Hot Engine Surfaces

Warning about touching hot engine components after operation.

Engine Fitment

Engine Starting and Break-in Procedure

First Time Engine Starting

Steps for the initial start-up of the engine after installation.

Engine Break-In

Guidelines for breaking in the engine for optimal performance and longevity.

Walbro Carburetor Settings

Factory Settings Baseline

Baseline adjustment settings for high and low speed mixture screws.

Clutch Fitment and Information

Clutch Removal Procedures

Maintenance Information

Limited Warranty Information

Warranty Coverage

Details on what the warranty covers, excluding specific damage types.

Exclusions from Warranty

List of conditions and damages not covered by the warranty.

Purchasers Remedy

The sole recourse for defective products is service or replacement.

Limitation of Liability

Exclusion of liability for indirect, consequential, or special damages.

Governing Law

Specifies that the warranty is governed by the laws of England.

Taylor 35 Specifications

General

Brand	Taylor
Model	35
Category	Engine
Language	English