38
Dispensing System Assembly
(Before Serial No. 20FR2001B02418 and 20PR2001B00197)
Figure-25
*Note: If replacing an accumulator door in a Dispenser with a
serial # before 20FR2001B02418 or 20PR2001B00197, both
the accumulator doors and accumulator housing (294416) must
be replaced.
6
10
4
8
3
2
5
1
9
11
7
12
13
14
15
16
21
20
19
18
17
Item Qty Part# Description
1
1 295380 Mechanical Panel
4 213559 Screw, Truss HD, 10-32x1/2” SST
2 1 N/A Assembly, Drum Motor w/ Mount
3 1 N/A Assembly, Weighing System
4 4 213141 Flat washer, ¼”
5 4 213142 Washer, split lock, ¼”
6 4 213260 Hex nut, ¼-20
7 1 290656 Spring, compression, NCWS
8 1 293566 Washer, Nylon, 0.173x0.375x0.054”
9 3 291308 Screw Trusshead Phillips #8-32x1¼”
10 1 290519 Circuit Board, NCWS
11 3 292252 Standoff, Nylon, Unthreaded, 0.75”L
Item Qty Part# Description
12 1 294775 Kit, NCWS Base
13 2 213140 Washer, Lock ,Reg Spr, ZP #10.ipt
14 2 Screw, SH Cap, included in 294775
15 3 213143 Screw, SH Cap, ¼-20x1/2” L
16 1 202068 Assembly, Linear Bearing, 180mm
17* 1 *294351 Accumulator Door LH
18* 1 *294350 Accumulator Door RH
19
2 293596 Collar, Accumulator shaft, UHMW
2 203257 O-ring Buna-N 11/16”ODx1/2”IDx3/32”
20 4 213356 Ring, retaining, E-style, ZP, ½”
21 2 213549 FH Cap Screw Socket ZP ¼-20x5/8”L
To Next Page
Loading...