EasyManuals Logo

Taylor RD30 User Manual

Taylor RD30
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Section 5
5-1
Models RD30/RC25
User Interface
5
User Interface
Figure 5-1
Control Switch
The control switch is located on the front of the machine.
The center position is off. The down position is the Wash
mode and activates the beater motor only. The up
position is the Auto mode. The Auto mode activates the
beater motor and enables refrigeration when the fill
switch is in the FILL position.
Fill Switch
The Fill switch is located on the front of the machine. The
FILL position enables refrigeration when the control
switch is in the Auto position. The FILL position enables
the fill module to replenish and maintain product levels in
the freezing cylinder and in the hopper. The OFF position
terminates the fill function. The refrigeration system is
disabled when the Fill switch is in the OFF position.
Mix Out Light
A mix out indicating light is located on the front panel.
When the light is lit, the hopper is empty and the mix
supply must be replenished. When the indicator lights,
refrigeration is automatically disabled to prevent
component damage. The beater motor continues to run.
Viscosity Control
The viscosity adjustment screw is located on the front of
the unit. The viscosity (thickness) of the slush can be
adjusted by turning the adjustment screw clockwise for a
thicker product or counterclockwise for a thinner product.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Taylor RD30 and is the answer not in the manual?

Taylor RD30 Specifications

General IconGeneral
BrandTaylor
ModelRD30
CategoryBeverage Dispenser
LanguageEnglish

Related product manuals