Taylor TE30WD User Manual

10
POWER SOURCES
This scale’s weighing platform and wireless dislay require
separate electric power. Before using the scale, please make
sure that both the scale base and wireless display have
batteries correctly installed or both adapters correctly
plugged in.
The scale base uses 6 AAA batteries and the wireless display
uses 4 AAA batteries (batteries not included), or the units
use a 120V AC adapter each (2 adapters included).
If
displays on the LCD, please use the included
Taylor adapters or replace the batteries.
Insert an adapter into the bottom of the wireless display
and the scale base.
Indicator - AC
Jack Connector
Weighing Platform-
AC Jack Connector

Taylor TE30WD Specifications

General

Display	LCD
Auto Power Off	Yes
Tare Function	Yes
Overload Indicator	Yes
Low Battery Indicator	Yes
Type	Digital Scale
Division	5g
Increments	5g