TaylorMade M5 - M5 Driver Loft Sleeve Adjustment; Loft Sleeve Flight Adjustment; M5 Adjustment Wrench Usage

DRIVER
STEP 1
LOFT SLEEVE™ [LOFT, LIE & FACE ANGLE ADJUSTMENT]
The 4-degree Loft Sleeve allows you to adjust loft, lie, and face angle of the M5/M5 Tour drivers.
Each Loft Sleeve has 12 positions to ne-tune your ball ight.
FIND YOUR FLIGHT
The 4° Loft Sleeve allows you to adjust the loft, lie and face angle of the M5 driver. Adjust the loft by loosening the
screw in the heel with the wrench, rotating the club head to the desired position, and tightening the screw.
• Each click of the 4° Loft Sleeve movements increases or decreases loft 0.5 – 0.75°
• Each click of the 4° Loft Sleeve movements increases or decreases lie angle 0.5 – 0.75°
• Each click of the 4° Loft Sleeve movements increases or decreases face angle 1.0 – 2.0°
ADJUSTING THE M5
The specially designed wrench will deliver only the amount of torque needed to securely
tighten the screw necessary to adjust the Loft Sleeve or position of the shot-shape weight. Do
not attempt to tighten a weight with any device other than the wrench that came with your club,
or you might over-tighten, strip the threads, or otherwise damage the screw or weight.
SQUARE FACE
STAT E D LO F T
56º LIE ANGLE
±0 RPM
SQUARE FACE
STAT E D LO F T
60º LIE ANGLE
±0 RPM
1.5º CLOSED
+0.75º LOFT
59.5º LIE ANGLE
+150 RPM
1.5º OPEN
-0.75º LOFT
59.5º LIE ANGLE
-150 RPM
3º CLOSED
+1.5º LOFT
58.75º LIE ANGLE
+300 RPM
3º OPEN
-1.5º LOFT
58.75º LIE ANGLE
-300 RPM
4º CLOSED
+2º LOFT
58º LIE ANGLE
+400 RPM
4º OPEN
-2º LOFT
58º LIE ANGLE
-400 RPM
3º CLOSED
+1.5º LOFT
5 7. 2 5 º LIE ANGLE
+300 RPM
3º OPEN
-1.5º LOFT
5 7. 2 5 º LIE ANGLE
-300 RPM
1.5º CLOSED
+0.75º LOFT
56.5º LIE ANGLE
+150 RPM
1.5º OPEN
-0.75º LOFT
56.5º LIE ANGLE
-150 RPM
UPRT
STD LOFT
HIGHERLOWER