TBB power RiiO Sun Series - User Manual

Guidelines for safe operation and maintenance by qualified personnel.

Precautions for environmental conditions, cable use, and placement.

Safety measures for handling batteries, including acid and electrical hazards.

Overview of RiiO Sun series inverter, its features, and applications.

RiiO Sun is an all-in-one solar inverter for off-grid and hybrid systems.

Explanation of the model naming convention for RiiO Sun series inverters.

Physical layout and components of the RiiO Sun All in One Solar Inverter.

Visual representation of the front panel of RiiO Sun All in One Solar Inverter models.

Details of the operation buttons and LED indicators on the inverter's front panel.

Identification and definition of terminal connections on the RiiO Sun inverter.

Detailed physical dimensions for different RiiO Sun inverter models.

Key operational features and capabilities of the RiiO Sun All in One Solar Inverter.

Explains the inverter's ability to manage energy flow and assist limited AC sources.

Highlights pure sine wave output, high surge capability, and battery protection.

Details the multi-stage charging algorithm for lead-acid batteries.

Supports charging for various battery chemistries like AGM, GEL, Lead-Carbon, and Lithium.

Built-in communication protocol compatible with TBB Super L lithium batteries.

Guide for performing manual equalization charging to improve flooded battery performance.

Details inverter transfer and protection features.

Details the inverter's uninterrupted AC power transfer capability, acting like a UPS.

Describes the inverter's built-in hardware and software protection features.

Automatic restart after overload, manual restart required after three consecutive shutdowns.

Automatic shutdown due to high temperature, resumes when normal.

Protects against short circuits and battery over-discharge.

Details communication interfaces like Dry Contact and RS485 for monitoring and control.

Reduces power consumption to prolong battery life when capacity is low.

Specifies minimum wire sizes and torque settings for DC cable connections.

Pre-operation checklist for ensuring correct installation and readiness.

Step-by-step procedures for safely powering on and off the inverter.

Overview of the inverter's buttons, LCD display, and LED indicators for operation status.

Explanation of various icons displayed on the inverter's LCD screen.

Guide to configuring inverter parameters via the LCD interface.

Configuration for AC source priority and operational modes.

Configuration for module, remote functions, and version display.

Configuration for battery type and charging parameters.

Configuration for battery voltage thresholds, alarm recovery, and charging time.

Settings for lithium battery SOC, temperature, equalization, and BMS control.

Configuration for ACin backup mode, bypass, and main switch selection.

Configuration for setting the current date and time on the inverter.

List of inverter fault codes and their corresponding solutions for troubleshooting.

List of MPPT fault codes and their corresponding solutions for troubleshooting.

Warning codes related to inverter operations and troubleshooting.

Warning codes specific to MPPT and BMS functions.

Warning codes associated with the BGK module and system initialization.

Technical specifications for RiiO Sun inverter models including power and charging.

Specifications for the solar charger controller, PV input, and MPPT.

Details on protection features and general electrical data for the inverters.

Physical dimensions, weight, cooling, protection index, and compliance standards.