TC Electronic SPARK BOOSTER User Manual

8
Changing battery – Unscrew the thumb-screw on the back of the pedal and detach the back-plate.
Unmount the old battery and attach the new battery to the battery clip making sure the polarity is
correct.Thenremounttheback-plate.Tosavebatterylife,removetheinputjackwhenyoudon’tplay.
Batteries must never be heated, taken apart or thrown into fire or water. Only rechargeable
batteries can be recharged. Remove the battery when the pedal is not being used for a longer
period of time. Dispose batteries according to local laws and regulations.
Voice Type selector
Three Voice types are available
- in“Fat”position(up),thelow-endfrequenciesarenaturallyboosted.Thisisexcellentwherethe
guitar is allowed to take up a great portion of the sonic spectrum.
- “Clean”position(middle),isatotaltransparentmode.NoEQisappliedtothesignal.
- in “Mid” position (down) midrange frequencies are emphasized. It is not only a boost in level that
will make your licks stand out. Sometimes a boost in midrange frequencies is exactly what you are
looking for more than a change in level.

TC Electronic SPARK BOOSTER Specifications

General

Brand	TC Electronic
Model	SPARK BOOSTER
Category	Other
Language	English