Do you have a question about the TC-Helicon GO GUITAR PRO and is the answer not in the manual?
Brand | TC-Helicon |
---|---|
Model | GO GUITAR PRO |
Category | Amplifier |
Language | English |
Connect the GO GUITAR PRO to your mobile device using the USB cable.
Plug headphones into the GO GUITAR PRO's headphone jack for monitoring.
Connect your guitar or bass using a 1/4" TS instrument cable.
Connect an amplifier to the GO GUITAR PRO's amp output via a 1/4" TS cable.
Set the THRU/FX switch to FX to hear processed sound from the app.
Adjust the GAIN wheel to achieve the optimal input level for your mobile device.
Adjust the VOLUME wheel to set your preferred headphone listening level.
Download a TC Helicon app to start using guitar and bass effects.
Details on analog input/output connections like guitar and headphones.
Information on digital interface and audio conversion specifications.
Specifications for device controls like gain and routing.
Technical details regarding frequency response, dynamic range, and power.
Physical dimensions and weight of the GO GUITAR PRO device.
Details on FCC rules and compliance for radio frequency energy.
Disclaimer regarding liability, technical changes, and trademarks.
Information on applicable warranty terms and conditions.