53
Section 6: Detailed Parameter Descriptions
DYNAMICS | De-ess
Use the VirtuaLead de-esser to help reduce sibilant levels.
Amount
Sets the amount that the De-ess will reduce sibilant levels.
Frequency
Sets the center point of the de-ess detection circuit that
decides when to reduce sibilant sounds.
EQ
The EQ in the VirtuaLead block is designed using double
precision filter algorithms. The resulting shape of all the
filters is displayed in the visualization area.
Low / High Gain, Freq
The low and high bands are 2nd-order shelving filters.
When any band's parameters are adjusted, a line
representing the EQ curve for that specific band is shown.
Mid 1 / 2 Gain, Freq., BW
The 2 mid-bands are 2nd-order parametric filters. When
any band's parameters are adjusted, a line representing
the EQ curve for that specific band is shown.
Low Cut
The low cut is a 4th-order filter. There are preset cut-off
points of "60 Hz", "80 Hz" and "120 Hz".
To Next Page
Loading...
