Need help?Do you have a question about the TC-Helicon VoicePrism and is the answer not in the manual?
General| Category | Audio Processor |
|---|---|
| Effects | Harmony, Pitch Correction, Reverb, Delay |
| MIDI | Yes |
| Inputs | 1 x XLR (Mic) |
| Outputs | XLR Output, Line Output |
Detailed description of the controls and indicators on the VoicePrism's front panel.
Overview of all input and output connectors on the rear of the VoicePrism unit.
Explains the main display, showing preset information and softknob assignments.
Adjusts parameters for the lead vocal path, including thicken, level, and pan.
Configures harmony voice settings like level, pan, gender, and voicing.
Modifies humanizing characteristics of harmony voices, such as timing and detune.
Sets musical attributes like key, scale, and portamento for harmony modes.
Allows selection of different harmony modes like No Vocals, Smooth Shift, Stepped Shift, and Chordal.
Selects and adjusts parameters for two independent post-effects blocks (FX1 and FX2).
Routes lead, harmony, or aux inputs to the FX1 and FX2 effect blocks.
Assigns lead, harmony, and aux inputs to the compressor/gate and EQ blocks.
Sets filter types and parameters for the two equalizer blocks (High Pass, Low Shelf, Band Boost/Cut).
Adjusts threshold, ratio, attack, and release for vocal compression.
Sets threshold, attack, and release to remove unwanted noise from the signal.
Controls the overall mix levels for lead, harmony, and effects.
Sets individual levels for each harmony voice.
Bypasses all VoicePrism processing stages, sending the dry signal directly to the outputs.
Toggles harmony voices on or off without affecting other processing blocks.
Sets MIDI channel, SysEx filter, and pitch bend range preferences.
Configures LCD contrast, chord mode, and bypass mode settings.
Adjusts audio processing parameters like ESS sensitivity, anti-feedback, and tuning.
Configures the functions of one or three-button footswitches.
Retains dynamics, EQ, and effect types while loading different harmony presets.
Sets parameters for dumping presets and songs via MIDI.
Restores factory presets and deletes step sequences.
Displays current software version and creator information.
Provides information for upgrading the unit's software.
Displays context-sensitive help information on the LCD.
Toggles phantom power on/off for condenser microphones.
Switches the active input between line and microphone inputs.
Plays demo audio or provides a cue note based on the current preset.
Renames, selects storage location, and saves presets or songs.
Copies EQ, dynamics, vocal, effect, or mix settings from one preset to another.
No harmony voices, only compressor, EQ, and effects are active.
Harmony pitches determined by incoming MIDI note information.
Creates harmonies based on fixed semitone intervals relative to the lead voice.
Generates intelligent, diatonic harmonies based on chord information via MIDI.
Creates musically correct, diatonic harmonies using key and scale information.
Explains the difference between diatonic and chromatic scales in harmony.
Lists MIDI messages and their corresponding parameters and value ranges.
Details how VoicePrism transmits and recognizes MIDI messages.
To Next Page
