Need help?Do you have a question about the TC-Helicon Quintet and is the answer not in the manual?
Digital Output| frequency response DIO | DC to 22/23.9 kHz ± 0.01 dB @ 44.1/48 kHz |
|---|---|
| sample rates | 44.1 kHz, 48 kHz |
| processing delay | 0.1 ms |
Analog Inputs| impedance balanced | 3.6 kOhm |
|---|---|
| impedance unbalanced | 1.8 kOhm |
| line input level @ 0 dBFS | 24 dBu to 0 dBu |
Analog Outputs| output impedance | 40 Ohm |
|---|---|
| max. output level balanced | 20 dBu |
| max. output level unbalanced | 14 dBu |
Operating Environment| operating temperature | 32° F to 122° F (0° C to 50° C) |
|---|---|
| storage temperature | -22° F to 167° F (-30° C to 70° C) |
| humidity | Max. 90 % non-condensing |
Supplementary| dimensions | 19" x 1.75" x 8.2" (483 x 44 x 195 mm) |
|---|---|
| weight | 4.1 lb. (1.85 kg) |
| mains voltage | 100 to 240 VAC, 50 to 60 Hz (auto-select) |
Details electromagnetic compatibility and interference standards.
Declares compliance with standards and directives.
On/Off switch for the unit.
Adjusts the Line Input level.
Peak meter showing input level.
Indicates input level too high, causing distortion.
Indicates internal DSP overflow.
Indicates valid incoming MIDI information.
Displays preset, edit, and status information.
On/Off function to set voicing for harmony.
Controls audio levels for lead, harmony, and reverb.
Enters edit or setup menus.
Returns to preset recall mode or recalls presets.
Stores the current preset to a location.
Edits parameter values.
Mutes the harmony voices.
Toggles all effects on/off.
Selects mic input, enabling line as AUX.
Enables a -20dB pad on the microphone input.
Adjusts microphone input gain.
XLR input for microphone.
1/4" balanced analog input.
1/4" balanced analog outputs.
S/PDIF digital audio output.
MIDI connection ports for control.
Port for external control devices.
Illustrates MIDI DIN connector pinout.
Diagrams for mono and balanced analog cables.
Examples for live performance setups.
Example for studio recording setup.
Explains the function of Voice Keys for harmony.
Controls lead, harmony, and reverb levels.
Accesses edit or setup menus.
Lists parameters editable within a preset.
Lists global parameters for system configuration.
Differentiates between preset and setup parameters.
Explains current vs. stored presets.
How global settings affect presets.
Process of loading/activating stored presets.
Steps to edit preset parameters.
Process for saving presets.
Information on backing up presets via MIDI.
Control functions of the Switch-3 footswitch.
Storing alternative voicings/scales for Scale Presets.
Introduction to harmonies.
Overview of five harmony creation methods.
Harmony controlled by MIDI note input.
Fixed interval chromatic harmony.
Intelligent diatonic harmonies based on chords.
Diatonic harmonies based on scale and key.
Unison voices with pitch/time humanization.
Tuning mode for perfect harmonic ratios.
Lists MIDI CC numbers for parameters.
Specifications for S/PDIF output.
Specifications for mic and line inputs.
Specifications for 1/4" analog outputs.
Compliance with electromagnetic compatibility standards.
Certifications and safety standards.
Operating temperature, humidity, etc.
MIDI and Pedal interface specifications.
Display, dimensions, weight, power.
To Next Page
