EasyManua.ls Logo

TC-Helicon VoicePrism - Studio Reverb; Chamber Reverb; Club Reverb; Hall Reverb

TC-Helicon VoicePrism
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Studio Reverb
Gives your sound the feel of a small, bright room where the higher frequencies are
highlighted, useful for increasing clarity in live spaces where those high frequencies
get lost.
Small, bright room, best used with a short delay.
PRE-DELAY (0 - 199ms): sets the length of time before the reverb begins.
DECAY TIME (0.1 - 1sec): sets the decay (audible echo) duration.
HIGH DAMP (0 - 9): attenuates undesirable high frequencies.
ROLLOFF (500Hz - flat): helps get rid of booming, mid-range tones.
Chamber Reverb
A larger version of the studio, this reverb works well for medium tempo songs.
Larger bright room for medium tempo songs.
PRE-DELAY (0 - 199ms): sets the length of time before the reverb begins.
DECAY TIME (0.2 - 2sec): sets the decay (audible echo) duration.
HIGH DAMP (0 - 9): attenuates undesirable high frequencies.
ROLLOFF (500Hz - flat): helps get rid of booming, mid-range tones.
Club Reverb
Sounds like the acoustics you would get in a club, without the cover charge.
Imitates the reverb you’d get playing live at a club.
PRE
-DELAY
(0 - 199ms): sets the length of time before the reverb begins.
DECAY TIME (0.5 - 3sec): sets the decay (audible echo) duration.
HIGH DAMP (0 - 9): attenuates undesirable high frequencies.
ROLLOFF (500Hz - flat): helps get rid of booming, mid-range tones.
Hall Reverb
Provides the natural reverberations you would get in a performance hall, good for
slower songs and a long delay time setting.
Provides concert hall acoustics.
PRE-DELAY (0 - 199ms): sets the length of time before the reverb begins.
DECAY TIME (1.5 - 4sec): sets the decay (audible echo) duration.
HIGH DAMP (0 - 9): attenuates undesirable high frequencies.
ROLLOFF (500Hz - flat): helps get rid of booming, mid-range tones.
Arena Reverb
Provides large, canyon-type reverberations for a “spacey” texture.
Gives your audio that big-arena feel.
PRE-DELAY (0 - 199ms): sets the length of time before the reverb begins.
DECAY TIME (2 - 20sec): sets the decay (audible echo) time.
HIGH DAMP (0 - 9): attenuates undesirable high frequencies.
ROLLOFF (500Hz - flat): helps get rid of booming, mid-range tones.
17
VoicePrism User Manual Effects: Reverb
Key Point:
check your reverb levels by listening and
then abruptly shutting the reverb off. This
gives you a better idea of how much
effect you’re adding
Key Point:
reverb effects are only
available in FX2.

Other manuals for TC-Helicon VoicePrism

Related product manuals