TC-Helicon Voicesolo FX150 - Singer with a TC-Helicon Processor in a Band with Monitor MIX

Show me how!
VoiceSolo FX150 Reference manual 28
Singer with a TC-Helicon processor in a band with monitor mix
A. Plug the Headphone OUT from your TC-Heli-
con unit into the AUX on the FX150.
B. Plug the Monitor Mix from FOH into Input 2.
C. Connect the output of your TC-Helicon pro-
cessor to the mixer.
Don’t forget to press the FULL MIX/CH1 switch!
This configuration leaves Input 1 free for an ad-
ditional instrument or mic.
FX150