TC-Helicon Voicesolo FX150 - Singer & Guitarist with a TC-Helicon Processor in a Band with Monitor MIX

Show me how!
VoiceSolo FX150 Reference manual 29
Singer & guitarist with a TC-Helicon processor in a band with monitor mix
A. Plug the Headphone OUT from your TC-Heli-
con unit into the AUX on the FX150.
B. Plug the Monitor Mix from FOH into Input 2.
C. Plug your TC-Helicon processor’s main out
into the mixer.
Don’t forget to press the FULL MIX/CH1 switch!
This setup is great for a TC-Helicon unit with
both vocal and guitar processing, such as Voice-
Live Play GTX, VoiceLive 2, VoiceLive 3, Voice-
Live Touch, VoiceLive Touch 2 or Harmony G-XT.
FX150