20
5. Reinsert all parts into
the machine.
Cleaning the brewing unit
You should clean the brewing unit once a week.
1. Press on the lower part of the
brewing unit cover as illustrated.
2. Take hold of the cover
at the top...
... and pull it off the machine.
3. Firmly press and hold the two
orange-coloured buttons and
pull the brewing unit straight
forwards out of the machine.
4. Rinse the brewing unit under
warm, running water.
5. Then let the brewing unit
dry completely.
6. Use the cleaning brush provided
to remove any leftover coffee
grounds or powder from the
brewing unit compartment.
7. Press the brewing unit back into
the machine using some force,
and without pressing the
orange-coloured buttons.
You should hear and feel the
brewing unit lock into place.
8. Place the cover back in front
of the brewing unit. It is held
in place by magnets.
To Next Page
Loading...
