23
6. Place the drip grid in the drip
bowl and connect the parts to
the machine.
Cleaning the brewing unit
CAUTION - Danger of burns from a hot brewing unit
The brewing unit becomes hot when preparing a drink.
•Do not clean the brewing unit during or shortly after use.
•Switch off the machine and let the brewing unit cool down before cleaning it.
1. Press on the lower part of the
brewing unit cover as illustrated.
The cover folds out a little at the
top.
2. Take hold of the cover at the top.
3. Remove the cover from the
machine.
4. Firmly press and hold the two
orange-colored buttons and pull
the brewing unit straight forward
out of the machine.
5. Rinse the brewing unit under
warm, running water.
6. Then let the brewing unit dry
completely.
7. Use the supplied cleaning brush
to remove any leftover coffee
grounds or powder from the
brewing unit compartment.
109547 en Kaffeevollautomat_USA_v4.indd 23109547 en Kaffeevollautomat_USA_v4.indd 23 31.08.22 09:5031.08.22 09:50
To Next Page
Loading...
