59
Adjusting the grind setting
CAUTION – material damage
• Grinder settings may only be adjusted while the grinder is in
operation.
• Adjust the grind settings in small increments. Observe the
difference in taste after 1 - 2 cups of coffee before carrying
out any new adjustments.
Requirements:
The machine is switched on and ready for use.
1. Slide the coffee/milk spout
up or down as required.
2. Place an empty container
underneath the coffee/milk
spout.
3. Remove the cover from the
coffee bean compartment.
The grind adjuster is located
in the coffee bean compart-
ment. It has been preset
to level 2 as default.
Increasing the coarseness of the grind
Increase the coarseness of the grind when you want the coffee to flow
more quickly, for example if the coffee is too strong for your taste.
4. Press one of the two
beverage buttons
(Espresso or Caffè Crema).
5. While the coffee is being
ground, turn the grind
adjuster clockwise towards
or a larger dot .
Increasing the fineness of the grind
Increase the fineness of the grind when you want the coffee to flow
more slowly and have more aroma, for example if the coffee is too
weak for your taste.
4. Press one of the two
beverage buttons
(Espresso or Caffè Crema).
5. While the coffee is being
ground, turn the grind
adjuster anticlockwise
towards
or a smaller
dot .
If the grind setting is too fine, the coffee may flow very slowly
or not at all.
en
106466 en Esperto_Pro_v5.indd 59 14.06.21 12:24
To Next Page
Loading...
