26
6. Pour the water in the cup away.
7. Repeat steps 4 to 6.
8. Finally, empty the residual water
tray and, if necessary, the used
capsule container:
m
Pull out the residual water
tray to remove it.
m
Remove the used capsule
container, the cup tray and
the residual water tray cover.
m
Empty the residual water
tray and, if necessary, the
used capsule container.
9. Reinsert all parts into the machine.
The finest aroma – the finest flavour
One capsule per cup
Each capsule is portioned for one cup of Caffè, Caffè Grande or espresso.
Full-bodied aroma
Only insert a capsule when you intend to use the machine. The capsule is pierced
as it is inserted. If it is not used immediately, the aroma will fade.
Preheating the cup
Fill the cup with hot water, then pour that water away shortly before using the cup.
This will ensure your beverage tastes its best.
Strength of the beverage
Adjust the strength of the beverage to suit your personal taste by adjusting
the quantity of water. This is very easy to do, and is described in the section
“Adjusting the strength of the beverage (beverage quantity)”.
Using large / small cups or glasses
For large cups, tall glasses and coffee
mugs, position the cup tray as shown
in the illustration.
For small cups, turn the
cup tray around as shown
in the illustration.
To Next Page
Loading...
