TCL 20L User Manual

8
Your phone only supports nano-SIM cards. Do not attempt to insert other
SIM types; otherwise this may cause damage to your phone.
Charging the battery
You are advised to fully charge the battery ( ). Charging status is indicated by
a percentage displayed on screen while the phone is powered off. The percentage
increases as the phone is charged.
To reduce power consumption and energy waste when the battery is fully
charged, disconnect your charger from the plug; switch off Wi-Fi, GPS,
Bluetooth or background-running applications when not in use; reduce the
backlight time, etc.
Reverse Charging with an OTG Cable
On-The-Go (OTG) is a USB transmitting technology that allows a phone to connect
to an external device with the help of an OTG cable.
You can use your phone to charge other devices using an OTG cable.
1. Connect your phone with the device to be charged using an OTG cable.
2. After connecting, a reminder box will pop up indicating that your phone can charge
the other phone and that the battery will reduce quickly during the charging.
3. Swipe down from the status bar to open the notification panel; touch Charging
connected device via USB, and then check that Supply power is selected by
default.

TCL 20L Specifications

General

Display Size	6.67 inches
Display Type	IPS LCD
Resolution	1080 x 2400 pixels
Processor	Qualcomm Snapdragon 662
CPU	Octa-core (4x2.0 GHz Kryo 260 Gold & 4x1.8 GHz Kryo 260 Silver)
GPU	Adreno 610
RAM	4GB / 6GB
Storage	64GB / 128GB
Expandable Storage	microSDXC (dedicated slot)
Rear Camera	48 MP (wide) + 8 MP (ultrawide) + 2 MP (macro) + 2 MP (depth)
Front Camera	16 MP
Battery Capacity	5000 mAh
Fast Charging	18W
Operating System	Android 11, TCL UI
Dimensions	166.2 x 76.9 x 9.1 mm
Weight	199 g