Set up your SIM card
The SIM (Subscriber Identity Module) card
identifies your device to the wireless network.
You can't make or receive phone calls without
a properly installed SIM card unless it's an
emergency call (911).
You don't need to power off your device before
inserting or removing the SIM card.
Note: Your device only supports Nano SIM
cards. To avoid damage to your device, do not
attempt to insert any other SIM types.
Insert the SIM pin
that’s provided to
eject the SIM tray
and then slide it
out gently.
Place or remove
the Nano SIM card
and the microSD
TM
card in the correct
slot as shown.
Note: MicroSD
TM
cards are sold separately. SIM
pin is included in the box.
To Next Page
Loading...
