EN
20
Audio
Sound Mode: Select a sound mode that best suits your audio needs. Enter the Sound mode menu
and press
Up/Down
button to select an option and then press OK. Select Reset to restore all sound
preset to factory defaults.
Audio Out Delay: Correct timing mismatches between the audio and video tracks. This option is
only available when Digital audio out is set to PCM
Audio only mode: Select to switch o the TV display and only listen to the sound from the TV. The
TV screen will turn o in about 10 seconds. In audio only mode, press any key to turn on the TV
screen again.
Advanced settings: Adjust more sound options.
Audio Only Mode: Select to switch o the TV display and only listen to the sound from the TV.
The TV screen will turn o in about 10 seconds. In audio only mode, press any key to turn on the
TV screen again.
Balance: Adjust the volume of the left and right speakers
Auto Volume Control: Equalize audio for a more relaxed experience.
Digital Audio Out: Select the audio format for the audio system connected with HDMI or or
optical digital cable.
To Next Page
Loading...
