15
Using more of your TV
Password in Parental Control
- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Network Wake Up
(* Not available for some models)
Note: This feature is only available in Google TV mode.
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective wireless home
network.
2. The desired controller, such as a smartphone, is
connected to the same network as your TV.
3. An app which supports network waking up function,
such as YouTube, has been installed into the
controller.
4. In Google TV mode, press on the remote control,
select (Settings) > Network & Internet > Network
Standby, and press OK to turnn it on.
When the TV is in networked standby mode, you can
use the app to wake up the TV remotely.
Notes:
- This feature is disabled if you press and hold the
button on the remote control and conrm to shut the
TV down.
- Before using the feature of network wake up, make
sure Quick start is set to on.
Using the Hands-free TV Voice Control
Note: This feature is only available in Google TV mode.
Before using the hands-free TV voice control, connect the
TV to the network and make sure it can access the Goo-
gle website rst. Then follow the steps below to access.
1. Turn the built-in MIC switch (next to the power button)
to on before using this function.
2. In Google TV mode, press the Google Assistant
button on your remote.
3. Select “Yes, I'm in”.
4. Say “OK Google” or “Hey Google” to activate it.
Notes:
- The availability of hands-free TV voice control
depends on your region/country/language and your
model. For details, please refer to your local dealer.
- A quiet surrounding is required for better function
when using it. The recommended using distance is
within 2 meters in front of TV set.
HbbTV Access
1. Press on the remote control, select (Settings) >
System > HbbTV Settings > HbbTV and press OK
to enter.
2. Press OK to activate it.
3. When you tune to a digital TV channel that offers
HbbTV, this will be signaled to you by an on-screen
indication (generally a red button, but other colour
buttons may also be used). Press the indicated
colour button to open the interactive pages.
4. Use Up/Down/Left/Right and the colour buttons to
navigate through the HbbTV pages and press OK to
confirm.
HbbTV Deactivation
To avoid disturbances that may be caused by HbbTV
broadcasting tests, you can turn off the HbbTV function:
1. Press on the remote control, select (Settings) >
System > HbbTV Settings > HbbTV and press OK
to enter.
2. Press OK to deactivate it.
Works with Alexa
To use the Works with Alexa function, you will need a
device like an Amazon Echo or Amazon Echo Dot (Sold
Separately). Set up your Amazon device. Then, on
your TV go to the Settings Menu, select System, and
select “Works With Alexa”. Then follow the on screen
prompts. Please note that within the Alexa app on your
phone, you will need to enable the TCL Assistant Skill,
through the Alexa Skills Menu.
Netix Settings
Netix provides on-demand movies and TV shows
delivered via the Internet. Netix is available in certain
countries.Unlimited membership is required. More
information can be found at www.netix.com <http://
www.netix.com/>.
Note: You can directly access Netix via clicking the
Netix button on the remote control.
Reset Shop
Allows you to reset the TV to factory default settings.
1. Press on the remote control, select (Settings) >
System > About > Reset and press OK to enter.
2. Press Up/Down to select Factory Reset and press
OK to enter. Then select Erase Everything and
press OK to confirm.
3. Enter 1234 or the PIN according to the on-screen
prompt.
4. Select OK and press OK to confirm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
