18
Optional: Connect your Blu-ray player
For ease of use, you are advised to connect a Blu-ray player
to the TV and enjoy the Sound Bar through HDMI-ARC.
However, in order to enjoy Dolby TrueHD based Atmos
content that not all TVs may support through HDMI-ARC,
you can optionally connect your Blu-ray player directly to
the Sound Bar using the HDMI-in port.
Notes
•
This product features an energy saving low-power standby
mode which consumes <0.5W. This is enabled by default.
In STANDBY mode, the HDMI loop-through function
including AirPlay and Chromecast are disabled.
If desired, a SLEEP mode can be enabled that activates
HDMI loop-through when the sound bar is not in use.
Power consumption in SLEEP mode is <4W and can vary
based on actual use of the HDMI loop-through feature. It
also allows for a faster startup of the sound bar.
It can be enabled as follows:
- Ensure the product is in STANDBY mode
- Hold the “ ” button on the remote control for 5
seconds until the display shows WAIT.
- After a short while, SLEEP MODE is shown. Now select
with “ ” button to turn it on. You will be asked to
confirm.
- Now exit the settings menu by using VOL+/VOL- key to
select EXIT and leave the menu.
To Next Page
Loading...
Need help?
General
