29
Online Firmware Update
Automatic detection and upgrade of Sound Bar software：
1. Ensure your Sound Bar and Subwoofer are both powered up.
2. Ensure your Sound Bar and Subwoofer pair successfully.
3. Ensure your Sound Bar is connected to Wi-Fi successfully (Refer to
Wi-Fi connection steps on page 24/25/26.)
4. You will see the following LED indications:
UPDATE FOUND > DOWNLOADING > UPG00~99 > UPGOK
Note：Do not interrupt the Sound Bar and subwoofer during the
upgrading.
WIFI
wifi Connected
UPGOK
UPGOK
Updating
Updating
HELLO
upgok
~
To Next Page
Loading...
