TCL Alcatel POP4-10 4G&VF - IMEI Check; Visual Mechanical Inspection

L1 Service Manual TCL Communication Ltd.
Rev.
9030G/9030Q/VFD1400 Level 1 Service Manual
Page
1.1
15/26
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
2.8. IMEI Check
1) Power on the handset, enter ”Settings” -> “About tablet” -> “Status” -> “IMEI information”.
2) Input 0X0-0+= on calculator screen.
3) There are two IMEI sticker positions on the device:
Position 1: in the back casing
Position 2: in the SD slot cover
If the IMEI sticker in the back casing is not lost:
We should make sure that the IMEI number MUST be the same with the one on the IMEI sticker; if not,
it‟s out of warranty policy.
2.9. Visual Mechanical inspection
Mechanical warranties check items:
1) Corrosion
 Corrosion on the USB connectors, SIM connectors, and other metal surfaces
2) Hole
 Holes (Diameter > 1mm) on any surface, including front casing, decorate frame, battery cover,
LCD Lens, keypad.
3) Bump
 Bumps (Diameter>1mm) on any surface, including the front casing, decorate frame, battery cover,
LCD Lens, keypad
4) Scratch (length > 3mm)
 Scratches on any surface, including the front casing, furnished frame, battery cover, LCD Lens,
keypad
5) Distortion
 Bend, twisted or crushed on the h/s, cover/casing or connectors
6) Broken
 LCD broken, casing broken, cover broken