TCL Alcatel POP4-10 4G&VF - Disassembly and Assembly

L1 Service Manual TCL Communication Ltd.
Rev.
9030G/9030Q/VFD1400 Level 1 Service Manual
Page
1.1
21/26
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
III. Press “Pass” to continue;
 SIM
I. Insert SIM card and the phone will detect it if functions well;
II. Press “Pass” to continue;
 Memory Card
I. Insert Memory card and the phone will detect it if functions well;
II. Press “Pass” to continue;
 Battery Temperature
I. It will display “Battery temperature should between: 20~50”, “current is xxx”
“Battery content should between: 40~60%”, “current is xxx”
“Battery Voltage is 4.289V”, “Battery Present is xxx” if it functions well;
II. Press ”Pass” to continue;
 Bluetooth
I. Bluetooth will search automatically and it will display device address if it functions well;
II. Press ”Pass” to continue;
 Wifi
I. It will search for WIFI hotspot and display searched result on the screen if it functions well;
II. Press”Pass” to continue;
 GPS
I. It will run GPS and search for satellite, and then it will display info such as “PRN”, “SUR”,
etc. on the screen if it functions well;
II. Press”Pass” to continue;
 NETWORK