TCL Alcatel POP4-10 4G&VF - Page 8

L2 Repair Document TCL Communication Ltd.
Rev.
9030G/9030Q/VDF1400
Level 2 Repair Document
Page
1.0
8/44
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
 Traceability
I. You can get information such as IMEI, BSN, BT, CU-REF, PTH, etc.
II. Press “pass” key to continue.
 RAW Data
I. You can see Raw data test is running and it will display “Test: Pass” if it
functions well;
II. Press “pass” key to continue;
 Touch Panel
I. “Please draw in the yellow area” according to instructions
 LCD
I. You will see the LCD display three colors - RED, GREEN and BLUE - if it
functions well;
II. Press “Pass” to continue.
III. You will see the LCD display greychart if it functions well.
IV. Press “Pass” to continue.
V. You will see the LCD display black if it functions well.
VI. Press “Pass” to continue.
VII. You will see the LCD display white if it functions well.
VIII. Press “Pass” to continue.
IX. You will see the LCD display grey if it functions well.
X. Press “Pass” to continue.
 Keyboard
I. You will see the key of the V+, V-, and power, click the corresponding key, then
the key turn gray on the screen.
II. Press “Pass” to continue.
 Lcd Backlight