EasyManua.ls Logo

TCL C2110WDG

TCL C2110WDG
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I>
I i
Operate Washihg Machine
Precautions for dry function
Textile
not
suitable
for drying
Textile with No Dry label;
Textile with wool and cashmere, in case
of
shrinkage;
Fine textile (like silk), in case
of
crinkling;
Textile with
polymer
rubber
or
similar materials;
Textile processed by flammable solvent (like
detergent
and oil), in case
of
explosion;
Dripping clothes will cost electricity and time and has bad drying effect.
A
Precautions
for
drying
The
weight
of
drying clothes must exceed the
max
rated drying capacity when
using drying function, otherwise it may cause bad drying result;
Bad drying result may be caused due to
unsmooth
water
inlet and low
water
pressure;
Divide drying clothes into batches
if
its
weight
exceeds
the
max rated drying
capacity;
Confirm
if
the clothes are suitable for drying,
do
not mix-drying clothes with
different materials;
Dry clothes made from special materials (such as cotton/fabric/down
jacket/underwear
etc.) after select according
washing
program;
Select according max spin rate
of
hand-washed clothes
to
improve drying
performance and shorten drying time;
Auto
dewatering
program will
be
proceeded
when
drying grogram starts,
displaying
time
varies from clothes distribution;
proper
adding and reducing
clothes can improve drying performance;
The left drying time is approximate time, it
may
be shortened
or
prolonged
according
to
clothes with different materials
or
drying degrees;
The clothes
may
shrink
or
deforms according
to
different
materials and
constituents
of
the
clothes after drying;
Do not touch
or
open the door during drying in
case
of
scald;
Open
the
door
after drying, take out the clothes
(especially
clothes with metal
zips)
before
they
are cooled
in
case
of
scald;
Drying
time
refers to selected time
or
auto
awareness
time
by program;
The
machine
dries clothes based on the principle
of
condensation; It
needs
to
inlet
or
drain
water
repeatedly so to improve drying performance. It does
not
belong to
machine
failure!

Related product manuals