Install Washing Machine
■
Connect
the
power
•
As
the
maximum
current through the
unit
is 1
0A
when
you
~
are
using
its heating function, please
make
s~re the
power
~
0
'7 "
supply
system ( current, power voltage and wire)
at
your
~
0
home
can
meet
the normal loading requirements
of
the
electrical appliances.
~,
~
•
Please
connect
the power to a socket
which
is
correctly
~~
~.
l'
installed and properly earthed.
~~
•
Make
sure the power voltage
at
your plate is same
to
that
in
X
~
the
machine's
rated voltage.
•
Power
plug
must
match the socket.
• Do
not
use multi-purpose plug
or
socket as extension cord.
• Do
not
connect
and pull out plug with
wet
hands.
•
When
pulling
out
the plug, hold the plug tightlly and then pull it out. Do
not
pull
power
cord forcibly.
•
If
power
cord is damaged
or
has any sign
of
being broken, special
power
cord
must
be selected
or
purchased from its
manufacturer
or
service
center
for replacement.
l(AiWNMtd
1.This
machine
must be earthed properly.
If
there is
any
short circuit,
earthing can reduce the
danger
of
electrical shock.
2.Washing machine shall be operated in a circuit
separate
from other
electrical appliances. Otherwise, power
protector
may
be tripped
or
fuse
may be burned out.
Operate Washing Machine
FAi:t•O»
Ensure
your
machine is installed
properly
before
use.
Before washing clothes
for
the first time, you must run a complete cycle
without
clothes.
To
do
this:
1.Connect
power
source and water.
2.Put
a little detergent(about 1 0g) into the
drawer
and close it.
3.Turn on the Power
CD,
turn the knob left/right to start the machine.
4.Turn the knob to
be"
Cotton"program.
5.Press the
1>11
(Start/Pause) button.
This will remove any
water
from the
manufacturer's
test
run remaining
in
the machine.
0
To Next Page
Loading...
