TCL D3000 Series User Manual

9
Press
OK/►
to enter the submenu. Press
OK/►
again
toseeaconrmationpage.Press
◄
toconrmtostart
your automatic search. The channel search may take a
few minutes. During the process, you can press
MENU
rst,andthen
◄
toconrmto stop the search halfway.
Manual Tuning
Press
OK/►
to enter the submenu. You can search
channels manually.
- Use
◄/►
to select a channel number at
Current
CH
.
- Use
◄/►
to select a color system at
Color
System
.
- Use
◄/►
to select a sound system at
Sound
System
.
- Select
Search
, then use
◄/►
to start searching.
When the channel you want is retrieved, it will be
saved automatically.
- If the picture is not clear, select
Fine-Tune
and use
◄/►
tonetunethechannel.
- You can also use
◄/►
to select
On
to turn on AFC
(automatic frequency control) function at
AFC
to
help get a better signal.
Lock
Press
MENU
on the remote control, select
Lock
and
press
▲/▼
to enter the lock menu. The
Lock
options
are as follows:
Lock System Off
Set Password
Sound Channel
Lock Setup
Channel Lock
Picture
Return
MENU
Exit
EXIT
AdjustMove
Note:
Some options may be not available for certain
signal sources.
Lock System
Press
◄/►
to select
On
or
Off
, but you have to enter
thecorrectpasswordwiththenumericbuttonsrst. After
you enter the correct password, you can have access to
the following two options:
-
Set Password
:
Press
OK/►
to enter. You can set
a new password with the numeric buttons.
Notes:
-
The default password is
0000
.
Sound Mode
Press
◄/►
to scroll through the sound mode settings:
Standard
,
Movie
,
Music
,
Sports
and
User
. When you
select
User
, you can have access to the following two
options’ settings.
-
Treble
: Press
◄/►
to adjust the treble level.
-
Bass
: Press
◄/►
to adjust the bass level.
Balance
Press
◄/►
to balance the sound between the left and
right speakers.
Surround
Press
◄/►
to toggle between
Off
and
On
.
Auto Volume
Press
◄/►
to select
On
to reduce the annoying blasts
involumeduringcommercialbreaksandalsoamplies
softer sounds in program material. Eliminates the need
to constantly adjust the volume.
SPDIF
Selects a proper sound type for your SPDIF output.
Press
◄/►
to toggle between
Auto
and
PCM
.
- If you select
Auto
, the SPDIF output format is
• Dolby Digital when the program’s sound format is
Dolby Digital or Dolby Digital Plus or HE-AAC.
• PCM when the program’s sound format is MPEG.
- If you select
PCM
, the SPDIF output format is PCM,
regardless of the program’s sound format.
Note:
The options you may choose depend on the
program you are watching.
EQ
Press
OK
or
◄/►
to enter the submenu. Use
▲/▼
to
select an option and press
◄/►
to adjust.
Channel
Press
MENU
on the remote control, select
Channel
and
press
▲/▼
to enter the channel menu. The
Channel
options are as follows:
Picture
Auto Tuning
Manual Tuning
Sound Channel Lock Setup
Return
MENU
Exit
EXIT
AdjustMove
Auto Tuning
TV Menu Operations

TCL D3000 Series Specifications

General

Brand	TCL
Model	D3000 Series
Category	LED TV
Language	English