TCL L49P10FS User Manual

9
Initial Setup
Thersttimeyouswitchtheseton,theInitialsetupwizard
opens, which guides you through the initial setup
process.
Perform the following steps before you press on the
remote control.
• Insert the batteries into the remote control.
• Connect the antenna cable to the TV.
• Plug in the AC cord to the AC outlet.
• Connect your TV to a network.
Make sure that the television is switched on and follow all
thestepsinturnspeciedhereafter.
Step 1 Select your language
Use ▲/▼ to select your desired language. Press OK to
conrmandmovetonextstep.(Note: optional languages
may be different according to TV model.)
Step 2 Agree the disclaimer
Use ▲/▼ to select [Agree and accept]. Press OK to tick.
Then press OKtoconrmandmovetonextstep.
Step 3 Set up the network
Android-based TV requires Internet service to access the
web and Smart TV applications. Connect Internet using your
existing wireless home network or Ethernet cable, and follow
the guides on the screen. Select [Wireless] or [Wired] and
press OK to proceed to the next screen.
You ca n also s kip this
step by selecting [Skip], and connect to the internet later. For
details, please see "Network Connection" & "Network Setup".
Step 4 Select your country
Use ▲/▼ to select your country. Press OKtoconrmand
move to next step. (Note: optional countries may be different
according to TV model.)
Step 5 Set up the time
Use ▲/▼ to move your cursor to the Date or Time, press
OK to enter the submenu. Use ▲/▼ to scroll between the
numbers and select the correct date and time. Select OK and
press OKtoconrmandmovetonextstep.
Step 6 All Done
When all setup is done, the [All Done] interface displays on
the screen, and press OKtonishtheinitialsetup.Youcan
also go back to former step and make any changes by using
◄or
.
Chapter 2 General Operation

TCL L49P10FS Specifications

General

Brand	TCL
Model	L49P10FS
Category	LED TV
Language	English