Connections and setup
Refer to your TV’s Quick Start Guide or other provided documentation to for model-specific information
about attaching the base or a wall mount and making connections to AC power and to your other
audio/video devices. The following information applies to all TCL Roku TV models.
Connecting an antenna, cable, or satellite box
If you are using an antenna, CATV cable without a set-top box, or a cable or satellite box that has only an
antenna output, connect a 75-ohm coaxial cable (not provided) from the device to the ANT/CABLE input
on the TV.
Tip: If you are using an antenna with a 300 ohm twin-lead cable, you need to use a 300-to-75 ohm
adapter (not provided) to adapt the twin-lead cable to a connection that is compatible with the TV’s
antenna input.
Tip: If you receive your TV stations through a set top box from a cable or satellite TV provider, connect it
to the TV using the best connection method available. From most to least desirable:
• HDMI
®
input – Digital HD and SD video
• AV input – analog SD video
• Antenna input – analog SD video using NTSC
To Next Page
Loading...
