TCL S643W - Listen to music from your Bluetooth device

29
Note: After powering on your Soundbar, if there is no
operation performed on either the Soundbar
or Remote Control within 10 seconds, all LED
indicators on the Soundbar will turn off and light
up again when the operation is resumed.
Tip: You can use more advanced functions on the
Remote Control (see ‘Overview of the Remote
Control’ on page 16).
Listen to music from your
Bluetooth device
1 Make sure that your device supports A2DP and/or
AVRCP. For information, check the specification of
your device.
2 Pair your Bluetooth device with the Soundbar (see
‘Connect the Soundbar with your Bluetooth device’
on page 25).
3 Start listening to music stored in your Bluetooth
device through the Soundbar.
• If your Bluetooth device supports A2DP, you
can listen to music, but you cannot control the
playback.
• If your Bluetooth device supports AVRCP, you can
listen to music and control music playback with
the Remote Control. Press the center button to
pause or resume music playback. Press left/right
button to skip to the previous/next track.
Note
• The operational range between the Soundbar and
your Bluetooth device is approximately 10 meters
(without any obstacle between the Bluetooth device
and Soundbar).