TCL Sweeva 1000B User Manual

- 07 -
EN
Sweeva has a pre-installed rechargeable battery that has to be fully charged before use.
Sweeva returns to the Charging Base at the end of a cleaning cycle or when its battery is running
low.
Charge Your Robot Vacuum
◆
Method 1: Attach Sweeva to the Charging Base by aligning its charging pins with the charging
pins on the base.
4.Remove objects within 3ft/1m of the left and right side and within 6ft/2m of the front of the
charging base.
5.Connect the round connector of the adapter into the power socket on the charging base and
the charging base and the other end into a wall outlet.
When the charging base connects to AC power, the LED indicator on the charging ase will turn b
solid blue.
Install the Charging Base in a location that Robot
Vacuum can easily access. It is recommended to
place the Charging Base against a wall, and on a
hard-level surface rather than on rugs or carpets.
Always keep the Charging Base plugged in, otherwise
Robot Vacuum will not automatically return to it.
Do not face the charging base owards strong light or high magnetic fields. (e.g. ,t
television, refrigerator and other home appliances)

TCL Sweeva 1000B Specifications

General

Brand	TCL
Model	Sweeva 1000B
Category	Vacuum Cleaner
Language	English