2. Press and hold the start / stop button for 7 seconds, the Robot will make two beeps.
ON
OFF
3. When the Wi-Fi indicator flashes blue rapidly; to connect your device and to Wi-Fi network,
please follow the steps below:
②
①
1. As shown in the picture,
click the button ① or ② to
add the "robot”
2. Select device: select
"Sweeva 2000"
3. Select Wi-Fi first, then
enter the password (the
device only supports 2.4
GHz Wi-Fi)
- 11 -
EN
To Next Page
Loading...
