TCL TS5010 User Manual

28
Manual pairing
1
Make sure the Sound Bar and wireless subwoofer are
properly connected to the power supply.
2
Press and hold PAIR at the back of the wireless
subwoofer until the orange LED on the subwoofer
ashesquickly.
 The wireless subwoofer is ready to pair.
3
Press on the top panel of your Sound Bar main unit
or the remote control to power on your Sound Bar main
unit.
 The Sound Bar and wireless subwoofer will pair
automatically.
 Pairing is successful. The orange LED remains on
solidly.
Note
• If the orange LED at the back of the subwoofer still
ashesafterpairing,itmeanspairingisnotsuccessful.
Disconnect the AC power cord from the wireless
subwoofer and then connect again after 3 minutes. Then
repeat steps 1 to 3.

TCL TS5010 Specifications

General

Brand	TCL
Model	TS5010
Category	Speaker System
Language	English