TCM FG20N2S - Page 48

(9)
Install spacers on each shift levers.
(10) Install snap rings on shift levers to
secure them to the transmission
case.
(II)
Install packing and case cover on
transmission case and tighten
mounting bolts to the specified
torque of 2.1-3.5 kg-m (15-25
ft.
lbs).
(12)
Install clutch cover on clutch
housing and tighten the two
mounting bolts to the specified
torque of 0.4-0.8 kg- m (3-6 ft-lbs).
Fig. 5-31 Installing Spacers
Fig. 5-32 Installing Snap Ring
5-33
Fig. Installing Case Cover
A
A
•
Fig. 5-34 Installing Clutch Cover
34