WIFI TOWEL RADIATOR
TCP Smart WiFi app-controlled towel radiator is the perfect bathroom heating solution. This advanced towel radiator comes
with Smart WiFi featuring 24/7 hour programming, with Comfort and Eco mode settings. The display panel can be fitted on
either left or right side to suit your bathroom layout.
This product is only suitable for well insulated spaces or occasional use.
USER INSTRUCTIONS
MODEL POWER
SMAWHTOWRAIL500W05EW AC230V
AC230V
50-60Hz 500W Class II
50-60Hz 1000W Class II
SMABLTOWRAIL500W05EW
SMABLTOWRAIL1000W10EW
IMPORTANT:
These instructions are for your safety. Please read thoroughly before use and retain for future
reference.
If you are in any doubt about installing this product, consult a
qualified electrician.
INSTALLATION INSTRUCTIONS
This product is suitable for indoor use only. It is IP24 rated. Do not submerge unit underwater. Do not attach to surfaces
which are damp, freshly painted or otherwise electrically conductive (eg metallic surfaces).
Please see above wall mounting instructions to ensure correct placement. Separate placement sheet
is included in
the box
1) Drill holes on the wall according to the above placements.
Warning: Be sure to keep to the distances as shown in the placement instructions.
2) Fit the fasten tube in the hole and fit the bracket on the wall with screws.
3) Carefully hang the unit on the bracket, then fix the unit with the locker and screw following above picture (step 1). Then
fix the screw in step 2 by turning the lock in the bracket. Finish by covering screw heads with the cover.
Warning: Before using
the heater, make sure it’s mounted tightly on the wall.
ø 10mm
L
L
392mm
662mm 1062mm
(step 1)
(step 2 )
Need help?
To Next Page
General