TCP Smart SMARADGBL1500UK

To Next Page

GLASS PANEL HEATERS

The TCP Smart Wi-Fi glass panel heaters offer an efficient and quick heating solution combined with

a sleek, modern look. Control your heating exactly as you desire either using control panel situated

on the heater or remotely using the TCP Smart App.

USER INSTRUCTIONS

IP24 ELECTRONIC SERIES

MODEL POWER

SMARADGBL1500UK/ AC220-240V 50-60Hz 1300-1500W Class I

SMARADGWH1500UK

SMARADGBL2000UK/ AC220-240V 50-60Hz 1800-2000W Class I

SMARADGWH2000UK

IMPORTANT: Read these instructions fully before using the heater. Retain these instructions for

future reference.

SAFETY INSTRUCTIONS (to be read before operating the heater).

Ensure the feet are correctly attached before using the heater.

CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to

be given where children and vulnerable people are present. Children 3 years and younger should be

continually supervised when in close proximity to the heater. Children aged from 3 years to less than

8 years shall only switch on/off the appliance provided that it has been placed or installed in its

intended normal operating position and they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years

and less than 8 years shall not plug in, regulate and clean the appliance or perform user

maintenance.

Use this heater on a flat, horizontal and stable surface, or fix it to the wall, as applicable.

Ensure the power supply to the socket into which the heater is plugged is in accordance with

the rating label on the heater and that the socket is earthed.

Keep the power cord away from the hot body of the heater.

Indoor use only.

Do not place the heater on carpets with a very deep pile.

Always ensure that the heater is placed on a firm level surface.

Do not place the heater close to curtains or furniture in order to avoid a fire hazard.

10.

Do not insert any object through the heat outlet or air grilles of the heater.

11.

Do not use the heater in areas where flammable liquids are stored or where flammable

Main Page

Need help?

Do you have a question about the TCP Smart SMARADGBL1500UK and is the answer not in the manual?

This document describes the TCP Smart Wi-Fi glass panel heaters, which are designed to offer efficient and quick heating solutions combined with a sleek, modern look. These heaters can be controlled via Wi-Fi using the TCP Smart App, allowing users to adjust heating preferences remotely or through the app itself.

Function Description

The TCP Smart Wi-Fi glass panel heaters provide a versatile heating solution with multiple operating modes and control options. They are designed for both free-standing and wall-mounted installations. The core function is to generate heat, which can be adjusted in terms of temperature and duration. The heaters feature a digital display for temperature and settings, along with physical buttons for direct control. Key functionalities include:

Temperature Control: Users can set a desired temperature, and the heater will operate to maintain it.
Heating Modes: The heaters offer different power levels (e.g., Low Heat, High Heat) and specialized modes like Anti-Frost.
Timer Function: A timer allows users to set a specific duration for the heater to operate, after which it will turn off automatically.
Scheduling: Users can create daily or weekly schedules for the heater to turn on and off at specific times, optimizing energy usage and comfort.
Child Lock: A safety feature that prevents unauthorized changes to settings.
Open Window Detection: This feature automatically detects a sudden drop in ambient temperature (e.g., due to an open window) and temporarily stops heating to save energy.
Wi-Fi Connectivity: The primary feature is remote control via the TCP Smart App, enabling users to manage the heater from anywhere.
Display Night Mode: Reduces the brightness of the panel light by 50% when using this mode.

Important Technical Specifications

The manual lists several models with varying power outputs and voltage requirements:

SMARADGBL1500UK/SMARADGWH1500UK: 1500W, 220-240V 50-60Hz, Class I
SMARADGBL2000UK/SMARADGWH2000UK: 2000W, 220-240V 50-60Hz, Class I

These specifications indicate that the heaters are designed for standard European electrical systems. The "Class I" designation implies that the product has basic insulation and also includes an earth connection for protection against electric shock.

Certification Conformity: The products are declared to be in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at https://tcpi.eu/compliance-data/.

Usage Features

The heaters offer a range of usage features designed for convenience, safety, and energy efficiency:

Installation:

Free Standing: The heater can be used as a free-standing unit by attaching the feet (supplied separately in the carton).
Wall Mounting: Detailed instructions are provided for wall mounting, including drilling holes and securing the appliance to the wall using brackets. A minimum distance of at least 40cm between the lower part of the appliance and the floor is required for wall mounting.

Control Options:

On-Device Controls: Physical buttons on the heater allow for setting the week, temperature, on/off, function, heat mode, child lock, schedule/timer, and display night mode.
TCP Smart App Control: The primary method of control is through the TCP Smart App, available for both Android and iOS. The app allows users to:
- Switch On/Off: Power the heater on or off.
- Select Mode: Choose between Anti-Frost, Low Heat, or High Heat modes.
- Set Timer: Configure a countdown timer for operation.
- Settings: Access Child Lock, Open Window Detection, and Schedule settings.
- Create Schedules: Set up daily or weekly schedules for automatic operation.
- Adjust Temperature: Set the desired target temperature.

Safety Features:

Child Lock: Prevents accidental changes to settings.
Open Window Detection: Automatically pauses heating when a significant temperature drop is detected, saving energy.
Overheating Protection: The manual warns against covering the heater, which can lead to overheating.
Placement Guidelines: Important warnings are provided regarding safe placement, such as maintaining a minimum distance of 100 cm from furniture or other objects, avoiding placement near walls, furniture, curtains, etc., and ensuring the power cord is not damaged.
Hazard Avoidance: Users are advised to avoid placing the heater in areas where flammable liquids are stored or where flammable fumes may be present.

Energy Efficiency:

Scheduling: Allows users to program the heater to operate only when needed, reducing energy consumption.
Open Window Detection: Contributes to energy savings by preventing unnecessary heating when a window is open.
Temperature Settings: Users can optimize energy use by setting appropriate temperatures for different modes.

Maintenance Features

The manual provides guidelines for cleaning and general maintenance to ensure the longevity and safe operation of the heater:

Cleaning:

Regular Cleaning: Always unplug the heater from the wall socket and allow it to cool down before cleaning.
Exterior Cleaning: Clean the outside of the heater by wiping with a damp cloth and buffing with a dry cloth. Do not use any detergents or abrasives, and do not allow any water to enter the heater.

Storage:

When the heater is not used for long periods, it should be protected from dust and stored in a clean, dry place.

Warranty Information:

The manufacturer provides a warranty in accordance with the legislation of the customer's own country of residence, with a minimum of 2 years, starting from the date on which the appliance is sold to the end-user.
The warranty covers defects in material or workmanship.
Repairs under warranty must be carried out by an authorized service center.
The warranty will not apply in cases of:
- Normal wear and tear.
- Incorrect use, e.g., overloading of the appliance, use of non-approved accessories.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the user manual, e.g., connection to an unsuitable mains supply or non-compliance with the installation instructions.
- Partially or completely dismantled appliances.

Correct Disposal of this Product:

The product should not be disposed of with other household wastes throughout the EU. It should be recycled responsibly to promote the sustainable reuse of material resources. Users are advised to return their used device to the retailer where the product was purchased or contact their local authority for environmentally safe recycling.